Community technical support mailing list was retired 2010 and replaced with a professional technical support team. For assistance please contact: Pre-sales Technical support via email to email@example.com.
The first thing you need to do in setting up ACL's is do a cvs chown and give yourself ownership. Then run cvs chacl for the permissions you want, then run it again for each user/group. Then last run it again with no user and turn off access for everyone not specified explicitly. Thanks, Don Zielke American Electric Power Direct (614) 583-6337 Audinet 8-220-6337 Email dzielke (at) aep.com --- KForce Professional Staffing 501 W. Schrock Road Suite 207 Westerville, OH 43081 Gerhard Fiedler <lists at connectionbrazil.com> Sent by: cvsnt-bounces at cvsnt.org 07/03/2005 01:49 PM To: cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook cc: Subject: [cvsnt] Re: CVSNT not enforcing read-only ACL Marco Rinaudo wrote: > now let check that my ACLs are set as I was expecting: > > ------------------------ > [root at power test]# cvs -d :pserver:MyLogin:MyPassword at MyServer.Com:/cvs > lsacl mymodule > Directory: mymodule > Owner: MyLogin > > user=myuser > read > [root at power test]# cvs -d :pserver:MyLogin:MyPassword at MyServer.Com:/cvs > rlsacl mymodule > Directory: mymodule > Owner: MyLogin > > user=myuser > read > ---------------------------------------- > > I eventually managed to sucessfully set "read" rights for the user named > myuser under the module named mymodule. > I am now expecting that myuser is not able to WRITE under mymodule, she is > supposed to be ONLY able to read not to write. Am I wrong? I'm not sure, but I think you have to /remove/ the write permission. AFAIK it's granted by default, so the only thing you've done with this is to add an explicit read permission to the default read/write permission. I guess what people do who want to have only explicit rights in their repositories is to issue a deny everything command for everybody on the root directory, which then makes the default to be all denied. Then you enable explicitly the rights you want to give, on the individual modules. Or you start out with everything granted (the default), and only deny specific rights to specific users our groups. Gerhard _______________________________________________ cvsnt mailing list cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs