[cvsnt] Re: Connecting to CVSNT over a router

Sekar sekar.gopinathan at fhlbny.com
Mon Dec 29 15:46:06 GMT 2003


Community technical support mailing list was retired 2010 and replaced with a professional technical support team. For assistance please contact: Pre-sales Technical support via email to sales@march-hare.com.


Tony:
   Thanks for your response.  I noticed that you have newer version.    I
will try and update the cvs server to 2.0.14.   
   As far as running the telnet 2401 on the cvs server.  I get a reponse
back from the cvs server(It says "Bad auth protocol" but at least it could
get to the cvs server) both in the same segment as well as different
segment.    Thats how I concluded the network setup was ok.   I can
confirm this again by the fact that cvs1.10 was able to connect from both
the segements where as cvs1.11 did not.
   Anyways I will try and upgrade the cvsnt and post my results.   

Cheers
SG
P.S:  About the router: I concur...:)


Tony Hoyle wrote:

> Sekar wrote:
> > Hello:
> >     I am using cvsNT 1.10 on windows nt server for about a year.  Recently

> The last cvsnt 1.10 (1.10.8) was in 2001...

> > we put a new upgraded CVS server to 1.11  on windows 2000 machine.   Both

> We've been on 2.0.x since March.  The latest is 2.0.16.

> I'd guess from this that you're either not using CVSNT or are using 
> ancient versions for some reason...  There are many bug fixes between 
> the new versions and older versions (the most stable feature-wise at the 
> moment is 2.0.14, and I'm doing a lot of updates at the moment to get a 
> well tested version for 2.0.17/8).

> > machines on the same network segment(for example x.y.1.1)   If I connect
> > to those machines from the same segment (x.y.1.2)  I am ok.   I can also
> > connect to windows nt/cvs1.10 machine fine from  a different segment(for
> > example x.yyy.1.1)   But when I connect to 2000/cvsnt 1.11 machine from
> > different segment(x.yyy.1.1)  I get a cannot connect to host.
> >     Our Tech support claims that cvsNT must be using a non standard
> > protocol thats not supported by our router.   Now I dont know if cvsNT is

> It's just TCP/IP - if your router doesn't support that then throw it in 
> the bin immediately :)

> Can you ping the other machine?  If not then your network setup is 
> broken and cvsnt has nothing to do with it.  Try a telnet to port 2401 
> of the remote machine.  If you get no response then the server isn't 
> running.

> Firewalls can also mess things up - they must allow the cvs port through.

> Tony





More information about the cvsnt mailing list
Download the latest CVSNT, TortosieCVS, WinCVS etc. for Windows 8 etc.
@CVSNT on Twitter   CVSNT on Facebook