[cvsnt] cvsnt for HPUX 11.23 PA-RISC

Courtenay Thomas cthomas at hidcorp.com
Mon Feb 25 23:02:05 GMT 2008


Community technical support mailing list was retired 2010 and replaced with a professional technical support team. For assistance please contact: Pre-sales Technical support via email to sales@march-hare.com.


# KRB5-Client                           B.11.23        Kerberos V5 Client 
Version 1.0 
  KRB5-Client.KRB5-64SLIB               B.11.23        Kerberos Client 64 
bit shared libraries (PA-RISC) 
  KRB5-Client.KRB5-ENG-A-MAN            B.11.23        KRB5-Client Manual 
Pages for HP-UX 
  KRB5-Client.KRB5-JPN-E-MAN            B.11.23        KRB5-Client Manual 
Pages for HP-UX 
  KRB5-Client.KRB5-JPN-S-MAN            B.11.23        KRB5-Client Manual 
Pages for HP-UX 
  KRB5-Client.KRB5-PRG                  B.11.23        Kerberos Client 
header files and sample programs 
  KRB5-Client.KRB5-RUN                  B.11.23        Kerberos Client 
commands (PA-RISC) 
  KRB5-Client.KRB5-SHLIB                B.11.23        Kerberos Client 32 
bit shared libraries (PA-RISC) 

it looks to me like we have it but at any rate what is the gserver?  how 
do I run cvsnt without it?
thanks
Courtenay Thomas
Systems Specialist
HID
9292 Jeronimo Road
Irvine, CA 92618
voicemail 949-598-5740
fax 949-598-5741
cell phone 408-205-6778
cthomas at hidcorp.com



"Arthur Barrett" <arthur.barrett at march-hare.com> 
02/25/2008 02:43 PM

To
"Courtenay Thomas" <cthomas at hidcorp.com>
cc
<cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook>, "Glen Starrett" <glen.starrett at march-hare.com>, "sales" 
<sales at march-hare.com>
Subject
RE: cvsnt for HPUX 11.23 PA-RISC






Courtenay,
 
I think you are missing the SHLIBS for KRB5, try this:
# swlist -l fileset KRB5-Client
 
Here are my results on HPUX 11.11:

# Initializing...
# Contacting target "melb0040"...
#
# Target:  melb0040:/
#
 
# KRB5-Client                           B.11.11        Kerberos V5 Client 
Version 1.0
  KRB5-Client.KRB5-64SLIB               B.11.11        KRB5-64SLIB
  KRB5-Client.KRB5-ENG-A-MAN            B.11.11        KRB5-ENG-A-MAN
  KRB5-Client.KRB5-JPN-E-MAN            B.11.11        KRB5-JPN-E-MAN
  KRB5-Client.KRB5-JPN-S-MAN            B.11.11        KRB5-JPN-S-MAN
  KRB5-Client.KRB5-PRG                  B.11.11        KRB5-PRG
  KRB5-Client.KRB5-RUN                  B.11.11        KRB5-RUN
  KRB5-Client.KRB5-SHLIB                B.11.11        KRB5-SHLIB
And on 11.23:
# Initializing...
# Contacting target "melb0030"...
#
# Target:  melb0030:/
#
 
# KRB5-Client                           B.11.23        Kerberos V5 Client 
Version 1.0
  KRB5-Client.KRB5-64SLIB               B.11.23        Kerberos Client 64 
bit shared libraries on IA emulator
  KRB5-Client.KRB5-ENG-A-MAN            B.11.23        KRB5-Client Manual 
Pages for HP-UX
  KRB5-Client.KRB5-IA32SLIB             B.11.23        Kerberos Client 32 
bit shared libraries (IPF)
  KRB5-Client.KRB5-IA64SLIB             B.11.23        Kerberos Client 64 
bit shared libraries (IPF)
  KRB5-Client.KRB5-JPN-E-MAN            B.11.23        KRB5-Client Manual 
Pages for HP-UX
  KRB5-Client.KRB5-JPN-S-MAN            B.11.23        KRB5-Client Manual 
Pages for HP-UX
  KRB5-Client.KRB5-PRG                  B.11.23        Kerberos Client 
header files and sample programs
  KRB5-Client.KRB5-RUN                  B.11.23        Kerberos Client 
commands (IPF)
  KRB5-Client.KRB5-SHLIB                B.11.23        Kerberos Client 32 
bit shared libraries on IA emulator
#
 
It seems odd to me that HPUX 11.23 on PA-Risc wants you to have the IPF 
shared libraries, but the only dependency we are listing is the 
KRB5-Client, so it must be considered a part of the package even on 
PA-RISC:
        fileset
                tag     $t-gserver-protocol
                title   Protocol gserver for CVSNT
                description     Protocol sserver requires KRB5-Client to 
be inst
alled
                revision        $v
                prerequisite    KRB5-Client
                directory       $gserver = 
$prefix$arch/lib/cvsnt/protocols
                file_permissions        -u 222 -g bin -o bin
                file    *
        end
See the following web site and particularly the bit under "Patch and 
Software Package Requirements for HPUX 11i v2":
http://docs.hp.com/en/J4258-90048/ch02s01.html
 
If you do not need the gserver protocol then  you can just install CVSNT 
without it, eg:
swinstall -s /tmp/cvsnt-2.5.04.2980-hppa-hpux32.depot cvsnt.base 
cvsnt.config cvsnt.params
 
The full list of filesets in the install are:
# swlist -l fileset /tmp/cvsnt-2.5.04.2980-hppa-hpux32.depot
# Initializing...
# Contacting target "melb0040"...
ERROR:   Software "/tmp/cvsnt-2.5.04.2980-hppa-hpux32.depot" was not
         found on host "melb0040:/".
# swlist -l fileset -s /tmp/cvsnt-2.5.04.2980-hppa-hpux32.depot
# Initializing...
# Contacting target "melb0040"...
#
# Target:  melb0040:/tmp/cvsnt-2.5.04.2980-hppa-hpux32.depot
#
 
# cvsnt                         2.5.04.2980    CVSNT Version Control 
System
  cvsnt.base                    2.5.04.2980    Base
  cvsnt.config                  2.5.04.2980    Config
  cvsnt.cvsnt-gserver-protocol  2.5.04.2980    Protocol gserver for CVSNT
  cvsnt.cvsnt-mysql-driver      2.5.04.2980    MySQL driver for CVSNT
  cvsnt.cvsnt-sqlite-driver     2.5.04.2980    SQLite driver for CVSNT
  cvsnt.cvsnt-sserver-protocol  2.5.04.2980    Protocol sserver for CVSNT
  cvsnt.params                  2.5.04.2980    Params
Params are the things in /etc and config are the things in /sbin ( like 
init.d  rc1.d   rc2.d) - if all you need is the client then you probably 
just need cvsnt.base, though I don't think I've ever tried that..
 
Regards,
 
 
Arthur Barrett
 
 
 
-----Original Message-----
From: Courtenay Thomas [mailto:cthomas at hidcorp.com] 
Sent: Tuesday, 26 February 2008 4:26 AM
To: Arthur Barrett
Cc: cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook; Glen Starrett; sales
Subject: RE: cvsnt for HPUX 11.23 PA-RISC


this is what I get now trying to install:
     * To be complete, the dependent software                           ^. 
              
..         "KRB5-Client,l=/,r=B.11.23" needs the following filesets:   .   
         
..       *         KRB5-IA32SLIB  .               
..       *         KRB5-IA64SLIB   .               
..         The prerequisite "KRB5-Client" for fileset   .               
..         "cvsnt.cvsnt-gserver-protocol,r=2.5.04.2980" cannot be   .   
..         successfully resolved.                                   


but when I do a swlist -l product I do see KRBR5-Client and PAM-Kerberos



  KRB5-Client           B.11.23        Kerberos V5 Client Version 1.0 
  PAM-Kerberos          C.01.24        PAM-Kerberos Version 1.24 

thanks
Courtenay Thomas
Systems Specialist
HID
9292 Jeronimo Road
Irvine, CA 92618
voicemail 949-598-5740
fax 949-598-5741
cell phone 408-205-6778
cthomas at hidcorp.com


"Arthur Barrett" <arthur.barrett at march-hare.com> 
02/22/2008 08:52 PM


To
"Courtenay Thomas" <cthomas at hidcorp.com> 
cc
"Glen Starrett" <glen.starrett at march-hare.com>, "sales" 
<sales at march-hare.com>, <cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook> 
Subject
RE: cvsnt for HPUX 11.23 PA-RISC








Courtenay,
 
Please try the latest testing release here:
http://www.cvsnt.org/archive/cvsnt-2.5.04.2980-hppa-hpux32.depot.Z
 
If that gives the same install error then please send the results of these 
commands:
swlist -d -s /tmp/cvsnt-2.5.04.2915-hppa-hpux32.depot
uname -m [: getconf HW_CPU_SUPP_BITS]
uname -s [: getconf KERNEL_BITS]
uname -r
uname -v
The source tarball is here if you need it:
http://www.cvsnt.org/archive/cvsnt-2.5.04.2980.tar.gz
 
 
Regards,
 
 
Arthur
 
 
 
This e-mail is confidential and may be privileged and/or proprietary. If 
you are not the intended recipient, any review, disclosure, copying, or 
use of this e-mail is prohibited.

This e-mail is confidential and may be privileged and/or proprietary.  If you are not the intended recipient, any review, disclosure, copying, or use of this e-mail is prohibited.


More information about the cvsnt mailing list
Download the latest CVSNT, TortosieCVS, WinCVS etc. for Windows 8 etc.
@CVSNT on Twitter   CVSNT on Facebook